From nozarm at triumf.ca Tue Oct 14 13:22:41 2014 From: nozarm at triumf.ca (Mina Nozar) Date: Tue, 14 Oct 2014 13:22:41 -0700 Subject: [Fluka-users] FLUKA 2011.2.14 installed In-Reply-To: <50298B09.9030303@triumf.ca> References: <4FC507F6.4050609@triumf.ca> <4FC6CEDB.4020602@triumf.ca> <4FC9387A.2070408@triumf.ca> <50298B09.9030303@triumf.ca> Message-ID: <543D8611.7040102@triumf.ca> Hello everyone, Now that most of the kinks in flair-2 have been ironed out, it is time for us to use it. I have installed the latest flair version (flair-2.0-4) on the cluster and have set it to the default version. Let me know if you have any issues. Best wishes, Mina From claylindsay at gmail.com Fri Oct 17 14:11:32 2014 From: claylindsay at gmail.com (Clay Lindsay) Date: Fri, 17 Oct 2014 14:11:32 -0700 Subject: [Fluka-users] FLUKA 2011.2.14 installed In-Reply-To: <543D8611.7040102@triumf.ca> References: <4FC507F6.4050609@triumf.ca> <4FC6CEDB.4020602@triumf.ca> <4FC9387A.2070408@triumf.ca> <50298B09.9030303@triumf.ca> <543D8611.7040102@triumf.ca> Message-ID: Hello, Flair has been upgraded from 2.0-0=>2.0-4 on hermes,orcinus and bugaboo. Jasper and grex required compiles of NumPy and PIL before an upgrade. I'll let you know when they're done. Also, as before, Flair 1.1 is available with the command 'flair1.1'. Let me know if there are any issues. Best, Clay On Tue, Oct 14, 2014 at 1:22 PM, Mina Nozar wrote: > Hello everyone, > > Now that most of the kinks in flair-2 have been ironed out, it is time for > us to use it. > > I have installed the latest flair version (flair-2.0-4) on the cluster and > have set it to the default version. > > Let me know if you have any issues. > > > Best wishes, > > Mina > _______________________________________________ > Fluka-users mailing list > Fluka-users at lists.triumf.ca > http://lists.triumf.ca/mailman/listinfo/fluka-users > -------------- next part -------------- An HTML attachment was scrubbed... URL: From claylindsay at gmail.com Fri Oct 17 14:30:06 2014 From: claylindsay at gmail.com (Clay Lindsay) Date: Fri, 17 Oct 2014 14:30:06 -0700 Subject: [Fluka-users] FLUKA 2011.2.14 installed In-Reply-To: References: <4FC507F6.4050609@triumf.ca> <4FC6CEDB.4020602@triumf.ca> <4FC9387A.2070408@triumf.ca> <50298B09.9030303@triumf.ca> <543D8611.7040102@triumf.ca> Message-ID: grex and jasper are now also upgraded to 2.0-4. That was easier than expected! Happy simulating, Clay On Fri, Oct 17, 2014 at 2:11 PM, Clay Lindsay wrote: > Hello, > > Flair has been upgraded from 2.0-0=>2.0-4 on hermes,orcinus and bugaboo. > Jasper and grex required compiles of NumPy and PIL before an upgrade. I'll > let you know when they're done. Also, as before, Flair 1.1 is available > with the command 'flair1.1'. Let me know if there are any issues. > > Best, > > Clay > > On Tue, Oct 14, 2014 at 1:22 PM, Mina Nozar wrote: > >> Hello everyone, >> >> Now that most of the kinks in flair-2 have been ironed out, it is time >> for us to use it. >> >> I have installed the latest flair version (flair-2.0-4) on the cluster >> and have set it to the default version. >> >> Let me know if you have any issues. >> >> >> Best wishes, >> >> Mina >> _______________________________________________ >> Fluka-users mailing list >> Fluka-users at lists.triumf.ca >> http://lists.triumf.ca/mailman/listinfo/fluka-users >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: