Introduction to 3D Printing

[Gaps]

Many apologies that the hyperlink didn’t work, here it is in its full glory:
https://bookings.cloud.microsoft/book/DetFac@triumfoffice365.onmicrosoft.com/s/ocED7K5qFUiqQi0C52UasA2?ismsaljsauthenabled
________________________________
From: postdocs <postdocs-bounces at lists.triumf.ca> on behalf of Gaps <gaps at triumf.ca>
Sent: May 11, 2026 03:52 PM
To: 'grads at lists.triumf.ca' <grads at lists.triumf.ca>; 'postdocs at lists.triumf.ca' <postdocs at lists.triumf.ca>
Subject: Introduction to 3D Printing

Dear GAPS,

Alec Stockton is kindly running another round of 3D printing workshops for beginners. This will be the same course as was held last year, so is recommended for those new to 3D printing at TRIUMF.
Sessions will be held on May the 19th, and 21st at 12PM in the MHESA, and you can book through the link here.

Additional sessions may be provided if there is enough interest, and Alec is also looking into running an advanced course.

Cheers,
You GAPS

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.triumf.ca/pipermail/grads/attachments/20260511/ac401f6a/attachment.html>